GENERAL CHARACTERISTICS
Styrokol Weiss (white) and Styrokol Grau (grey) are cement-based adhesives.
They provide high bonding strength, elasticity, and resistance to moisture.

INSTRUCTIONS FOR USE
Styrokol should be slowly added to water while mixing continuously until a homogeneous mixture is obtained. The use of an electric mixer is recommended. The mixture should be left to rest for 10 minutes, then mixed again briefly before use. On smooth surfaces, the adhesive should be applied using a notched trowel so that the substrate surface is covered evenly. On uneven and non-levelled surfaces, the adhesive should be applied along the perimeter of the polystyrene board and in the center. A leveling compound may also be used.

APPLICATION AREAS
Suitable for bonding EPS (styrofoam) boards, glass wool, polyurethane, and similar materials on façade surfaces with concrete, plaster, or brick substrates.

STORAGE
12 months from the date of production if stored in the original unopened packaging, in places protected from moisture and frost.