Silkakol is a high-quality cement-based adhesive, modified with acrylic polymer, for bonding lightweight blocks such as siporex (AAC).

INSTRUCTIONS FOR USE

Siporex blocks must be clean and free of dust on the surface. The material is gradually added to clean water while mixing with a low-speed mixer until a homogeneous mixture is obtained. The mixture should rest for about 10 minutes and then be mixed again before application. The adhesive is applied to the surface using a notched metal trowel so that it spreads evenly. The blocks are placed in the desired position and pressed lightly to ensure full adhesion.

APPLICATION AREAS

Silkakol Weiss and Grau are used for fixing siporex blocks in the construction of interior and exterior walls.

TECHNICAL DATA

• Color: white / grey
• Application temperature: +5°C to +35°C
• Application thickness: up to 10 mm
• Working time in container: at least 6 hours
• Water requirement: 6 – 8 L per 25 kg
• Consumption: approximately 13 kg for the construction of 1 m³ wall with siporex blocks

STORAGE

Shelf life: 12 months from the date of production if stored in the original unopened packaging in environments protected from moisture and frost.