Fuge Masa is a cement-based product available in various colors. The corresponding product color is marked on the packaging with the symbol “X”. It provides high mechanical resistance and stable color consistency after application. Recommended for filling ceramic tile joints with widths from 1 mm to 10 mm. Produced according to the EN 13888 standard.

USE AND APPLICATION

• The surface where the grout will be applied must be completely clean, free from dust, grease, or other residues.
• Ceramic tile joints should be cleaned beforehand with a damp cloth.
• Water is gradually added to the grout while mixing with a mixer until a homogeneous mixture is obtained.
• The mixture should rest for about 10 minutes and then be mixed again before application.
• Application is done on ceramic tiles using a rubber tool (rubber spatula), moving diagonally across the joints to ensure full filling and to avoid voids.
• After application, excess material should be removed from the tile surface with a dry cloth or a damp sponge, taking care not to damage the grout.

ADVANTAGES

• High resistance to wear and mechanical stress
• Good resistance to moisture
• Color stability after drying
• Easy application and good workability