Structural Facade

 

1.5mm

2.0mm

facace

Structural Facade

25 kg

Used for decorating interior and exterior surfaces. After hardening, it creates a decorative and durable layer. Resistant to atmospheric conditions (rain, high and low temperatures) as well as mechanical impact. With diffusion capability (allows the surface to breathe). Elastic and environmentally friendly. Allows the formulation of a wide range of colors according to preference.

COVERAGE

Standard plaster: 7 – 9 m² / 25 kg
Coverage depends on the type and condition of the surface where it is applied.

APPLICATION INSTRUCTIONS

To achieve a perfect application:

  • Surfaces must be dry, clean, free from dirt, stains, mold, and without structural damage.
  • The surface should be pre-treated with Bunjamini Base-Primer (Bazë-Grund) diluted with water (20%) before applying the façade coating.
  • Old or damaged surfaces should be repaired and treated with Bunjamini Base-Primer, then coated with the façade material.
  • Application should be done with a stainless steel trowel, while the texture should be created using a plastic trowel (circular movements).

STORAGE

The product should be stored away from heat, direct sunlight, and frost.



Contac Us


Contact us directly at the phone number for information.

+383 49 256 051

Or write to us by email at any time for any request you may have.

[email protected]

Click to connect directly and get directions on how to find our location.

Shupkovc, Mitrovicë